Leroy
Junior Member
White's XLT
Posts: 15
|
Post by Leroy on Dec 2, 2004 2:15:46 GMT -5
If Auto Trac is "ON", does it matter what numbers are in the Fine GEB and Coarse GEB settings ? I always notice in most Fine and Coarse programs there are no numbers, but "AUTO" for that setting.
Thanks in advance,
Leroy H.
|
|
|
Post by goldhart on Dec 2, 2004 7:35:52 GMT -5
Leroy no it does not matter what the manual setting numbers are if the auto track is on. It would be very rare to turn off auto track and put in ground balance numbers manually. HH Dan3
|
|