|
Post by dang on Aug 24, 2004 17:50:28 GMT -5
After the ground balance is set is it nessesary to readjust it if I change the threshold later?
|
|
|
Post by Rudy on Aug 24, 2004 22:31:57 GMT -5
I would think not, but you can easily check the GB simply by raising and then lowering the coil. You should hear little if any change in the threshold volume (as long as you lower the coil on clean ground).
|
|
|
Post by pijolley on Sept 3, 2004 5:52:13 GMT -5
thanks learned more here than from the dealer
pijerry
|
|